akhirnya…..setelah nanya2 di forum tentang mikrotik sebagai bridge dan bandwitdh limiter mentok, cari2 artikel ternyata om valens dah punya artikelnya, jadi malu…. Well biarlah, yang penting dah dapet.

Bagi mikrotikers silahkan dicoba konfigurasi seperti berikut :

[admin@Mie] > interface print
Flags: X – disabled, D – dynamic, R – running
# NAME TYPE RX-RATE TX-RATE MTU
0 R LAN ether 0 0 1500
1 R WAN ether 0 0 1500
2 R bridge1 bridge 0 0 1500

[admin@Mie] > interface bridge port print
Flags: X – disabled, I – inactive, D – dynamic
# INTERFACE BRIDGE PRIORITY PATH-COST
0 LAN bridge1 128 10
1 WAN bridge1 128 10

[admin@Mie] > ip firewall mangle print
Flags: X – disabled, I – invalid, D – dynamic
0 chain=prerouting in-interface=LAN src-address=117.104.222.20
action=mark-packet new-packet-mark=data-up passthrough=no

1 chain=postrouting out-interface=LAN dst-address=117.104.222.20
action=mark-packet new-packet-mark=data-down passthrough=no

[admin@Mie] > queue tree print
Flags: X – disabled, I – invalid
0 name=”queue-up” parent=WAN packet-mark=data-up limit-at=0 queue=default
priority=8 max-limit=128000 burst-limit=0 burst-threshold=0
burst-time=0s

1 name=”queue-down” parent=LAN packet-mark=data-down limit-at=0
queue=default priority=8 max-limit=256000 burst-limit=0
burst-threshold=0 burst-time=0s